# MoreCoqMore About Coq

Require Export Poly.

This chapter introduces several more Coq tactics that,
together, allow us to prove many more theorems about the
functional programs we are writing.

# The apply Tactic

Theorem silly1 : ∀(n m o p : nat),

n = m →

[n,o] = [n,p] →

[n,o] = [m,p].

Proof.

intros n m o p eq1 eq2.

rewrite ← eq1.

(* At this point, we could finish with

"rewrite → eq2. reflexivity." as we have

done several times above. But we can achieve the

same effect in a single step by using the

apply tactic instead: *)

apply eq2. Qed.

The apply tactic also works with

*conditional*hypotheses and lemmas: if the statement being applied is an implication, then the premises of this implication will be added to the list of subgoals needing to be proved.Theorem silly2 : ∀(n m o p : nat),

n = m →

(∀(q r : nat), q = r → [q,o] = [r,p]) →

[n,o] = [m,p].

Proof.

intros n m o p eq1 eq2.

apply eq2. apply eq1. Qed.

You may find it instructive to experiment with this proof
and see if there is a way to complete it using just rewrite
instead of apply.
Typically, when we use apply H, the statement H will
begin with a ∀ binding some

*universal variables*. When Coq matches the current goal against the conclusion of H, it will try to find appropriate values for these variables. For example, when we do apply eq2 in the following proof, the universal variable q in eq2 gets instantiated with n and r gets instantiated with m.Theorem silly2a : ∀(n m : nat),

(n,n) = (m,m) →

(∀(q r : nat), (q,q) = (r,r) → [q] = [r]) →

[n] = [m].

Proof.

intros n m eq1 eq2.

apply eq2. apply eq1. Qed.

Theorem silly_ex :

(∀n, evenb n = true → oddb (S n) = true) →

evenb 3 = true →

oddb 4 = true.

Proof.

(* FILL IN HERE *) Admitted.

☐
To use the apply tactic, the (conclusion of the) fact
being applied must match the goal

*exactly*— for example, apply will not work if the left and right sides of the equality are swapped.Theorem silly3_firsttry : ∀(n : nat),

true = beq_nat n 5 →

beq_nat (S (S n)) 7 = true.

Proof.

intros n H.

simpl.

(* Here we cannot use apply directly *)

Abort.

In this case we can use the symmetry tactic, which switches the
left and right sides of an equality in the goal.

Theorem silly3 : ∀(n : nat),

true = beq_nat n 5 →

beq_nat (S (S n)) 7 = true.

Proof.

intros n H.

symmetry.

simpl. (* Actually, this simpl is unnecessary, since

apply will do a simpl step first. *)

apply H. Qed.

#### Exercise: 3 stars (apply_exercise1)

Hint: you can use apply with previously defined lemmas, not just hypotheses in the context. Remember that SearchAbout is your friend.Theorem rev_exercise1 : ∀(l l' : list nat),

l = rev l' →

l' = rev l.

Proof.

(* FILL IN HERE *) Admitted.

☐
(* FILL IN HERE *)

☐

#### Exercise: 1 star, optional (apply_rewrite)

Briefly explain the difference between the tactics apply and rewrite. Are there situations where both can usefully be applied?☐

# Inversion

Inductive nat : Type :=

| O : nat

| S : nat → nat.

It is clear from this definition that every number has one of two
forms: either it is the constructor O or it is built by applying
the constructor S to another number. But there is more here than
meets the eye: implicit in the definition (and in our informal
understanding of how datatype declarations work in other
programming languages) are two other facts:
| O : nat

| S : nat → nat.

- The constructor S is
*injective*. That is, the only way we can have S n = S m is if n = m. - The constructors O and S are
*disjoint*. That is, O is not equal to S n for any n.

c a1 a2 ... an = d b1 b2 ... bm

for some constructors c and d and arguments a1 ... an and
b1 ... bm. Then inversion H instructs Coq to "invert" this
equality to extract the information it contains about these terms:
- If c and d are the same constructor, then we know, by the
injectivity of this constructor, that a1 = b1, a2 = b2,
etc.; inversion H adds these facts to the context, and tries
to use them to rewrite the goal.
- If c and d are different constructors, then the hypothesis H is contradictory. That is, a false assumption has crept into the context, and this means that any goal whatsoever is provable! In this case, inversion H marks the current goal as completed and pops it off the goal stack.

Theorem eq_add_S : ∀(n m : nat),

S n = S m →

n = m.

Proof.

intros n m eq. inversion eq. reflexivity. Qed.

Theorem silly4 : ∀(n m : nat),

[n] = [m] →

n = m.

Proof.

intros n o eq. inversion eq. reflexivity. Qed.

As a convenience, the inversion tactic can also
destruct equalities between complex values, binding
multiple variables as it goes.

Theorem silly5 : ∀(n m o : nat),

[n,m] = [o,o] →

[n] = [m].

Proof.

intros n m o eq. inversion eq. reflexivity. Qed.

Example sillyex1 : ∀(X : Type) (x y z : X) (l j : list X),

x :: y :: l = z :: j →

y :: l = x :: j →

x = y.

Proof.

(* FILL IN HERE *) Admitted.

x :: y :: l = z :: j →

y :: l = x :: j →

x = y.

Proof.

(* FILL IN HERE *) Admitted.

☐

Theorem silly6 : ∀(n : nat),

S n = O →

2 + 2 = 5.

Proof.

intros n contra. inversion contra. Qed.

Theorem silly7 : ∀(n m : nat),

false = true →

[n] = [m].

Proof.

intros n m contra. inversion contra. Qed.

Example sillyex2 : ∀(X : Type) (x y z : X) (l j : list X),

x :: y :: l = [] →

y :: l = z :: j →

x = z.

Proof.

(* FILL IN HERE *) Admitted.

x :: y :: l = [] →

y :: l = z :: j →

x = z.

Proof.

(* FILL IN HERE *) Admitted.

☐
While the injectivity of constructors allows us to reason
∀ (n m : nat), S n = S m → n = m, the reverse direction of
the implication, provable by standard equational reasoning, is a
useful fact to record for cases we will see several times.

Lemma eq_remove_S : ∀n m,

n = m → S n = S m.

Proof. intros n m eq. rewrite → eq. reflexivity. Qed.

Here's another illustration of inversion. This is a slightly
roundabout way of stating a fact that we have already proved
above. The extra equalities force us to do a little more
equational reasoning and exercise some of the tactics we've seen
recently.

Theorem length_snoc' : ∀(X : Type) (v : X)

(l : list X) (n : nat),

length l = n →

length (snoc l v) = S n.

Proof.

intros X v l. induction l as [| v' l'].

Case "l = []". intros n eq. rewrite ← eq. reflexivity.

Case "l = v' :: l'". intros n eq. simpl. destruct n as [| n'].

SCase "n = 0". inversion eq.

SCase "n = S n'".

apply eq_remove_S. apply IHl'. inversion eq. reflexivity. Qed.

#### Exercise: 2 stars, optional (practice)

A couple more nontrivial but not-too-complicated proofs to work together in class, or for you to work as exercises. They may involve applying lemmas from earlier lectures or homeworks.Theorem beq_nat_0_l : ∀n,

true = beq_nat 0 n → 0 = n.

Proof.

(* FILL IN HERE *) Admitted.

Theorem beq_nat_0_r : ∀n,

true = beq_nat n 0 → 0 = n.

Proof.

(* FILL IN HERE *) Admitted.

☐

# Using Tactics on Hypotheses

Theorem S_inj : ∀(n m : nat) (b : bool),

beq_nat (S n) (S m) = b →

beq_nat n m = b.

Proof.

intros n m b H. simpl in H. apply H. Qed.

Similarly, the tactic apply L in H matches some
conditional statement L (of the form L1 → L2, say) against a
hypothesis H in the context. However, unlike ordinary
apply (which rewrites a goal matching L2 into a subgoal L1),
apply L in H matches H against L1 and, if successful,
replaces it with L2.
In other words, apply L in H gives us a form of "forward
reasoning" — from L1 → L2 and a hypothesis matching L1, it
gives us a hypothesis matching L2. By contrast, apply L is
"backward reasoning" — it says that if we know L1→L2 and we
are trying to prove L2, it suffices to prove L1.
Here is a variant of a proof from above, using forward reasoning
throughout instead of backward reasoning.

Theorem silly3' : ∀(n : nat),

(beq_nat n 5 = true → beq_nat (S (S n)) 7 = true) →

true = beq_nat n 5 →

true = beq_nat (S (S n)) 7.

Proof.

intros n eq H.

symmetry in H. apply eq in H. symmetry in H.

apply H. Qed.

Forward reasoning starts from what is

*given*(premises, previously proven theorems) and iteratively draws conclusions from them until the goal is reached. Backward reasoning starts from the*goal*, and iteratively reasons about what would imply the goal, until premises or previously proven theorems are reached. If you've seen informal proofs before (for example, in a math or computer science class), they probably used forward reasoning. In general, Coq tends to favor backward reasoning, but in some situations the forward style can be easier to use or to think about.#### Exercise: 3 stars (plus_n_n_injective)

Practice using "in" variants in this exercise.Theorem plus_n_n_injective : ∀n m,

n + n = m + m →

n = m.

Proof.

intros n. induction n as [| n'].

(* Hint: use the plus_n_Sm lemma *)

(* FILL IN HERE *) Admitted.

☐

# Varying the Induction Hypothesis

*start*this proof is a little bit delicate: if we begin it with

intros n. induction n.

all is well. But if we begin it with
intros n m. induction n.

we get stuck in the middle of the inductive case...
Theorem double_injective_FAILED : ∀n m,

double n = double m →

n = m.

Proof.

intros n m. induction n as [| n'].

Case "n = O". simpl. intros eq. destruct m as [| m'].

SCase "m = O". reflexivity.

SCase "m = S m'". inversion eq.

Case "n = S n'". intros eq. destruct m as [| m'].

SCase "m = O". inversion eq.

SCase "m = S m'".

assert (n' = m') as H.

SSCase "Proof of assertion".

(* Here we are stuck. We need the assertion in order to

rewrite the final goal (subgoal 2 at this point) to an

identity. But the induction hypothesis, IHn', does

not give us n' = m' -- there is an extra S in the

way -- so the assertion is not provable. *)

Abort.

What went wrong?
The problem is that, at the point we invoke the induction
hypothesis, we have already introduced m into the context —
intuitively, we have told Coq, "Let's consider some particular
n and m..." and we now have to prove that, if double n =
double m for
The next tactic, induction n says to Coq: We are going to show
the goal by induction on n. That is, we are going to prove that
the proposition
holds for all n by showing
If we look closely at the second statement, it is saying something
rather strange: it says that, for a
then we can prove
To see why this is strange, let's think of a particular m —
say, 5. The statement is then saying that, if we know
then we can prove
But knowing Q doesn't give us any help with proving R! (If we
tried to prove R from Q, we would say something like "Suppose
double (S n) = 10..." but then we'd be stuck: knowing that
double (S n) is 10 tells us nothing about whether double n
is 10, so Q is useless at this point.)
To summarize: Trying to carry out this proof by induction on n
when m is already in the context doesn't work because we are
trying to prove a relation involving
The good proof of double_injective leaves m in the goal
statement at the point where the induction tactic is invoked on
n:

*this particular*n and m, then n = m.- P n = "if double n = double m, then n = m"

- P O
- P n → P (S n)

*particular*m, if we know- "if double n = double m then n = m"

- "if double (S n) = double m then S n = m".

- Q = "if double n = 10 then n = 5"

- R = "if double (S n) = 10 then S n = 5".

*every*n but just a*single*m.Theorem double_injective' : ∀n m,

double n = double m →

n = m.

Proof.

intros n. induction n as [| n'].

Case "n = O". simpl. intros m eq. destruct m as [| m'].

SCase "m = O". reflexivity.

SCase "m = S m'". inversion eq.

Case "n = S n'".

(* Notice that both the goal and the induction

hypothesis have changed: the goal asks us to prove

something more general (i.e., to prove the

statement for _every_ m), but the IH is

correspondingly more flexible, allowing us to

choose any m we like when we apply the IH. *)

intros m eq.

(* Now we choose a particular m and introduce the

assumption that double n = double m. Since we

are doing a case analysis on n, we need a case

analysis on m to keep the two "in sync." *)

destruct m as [| m'].

SCase "m = O".

(* The 0 case is trivial *)

inversion eq.

SCase "m = S m'".

(* At this point, since we are in the second

branch of the destruct m, the m' mentioned

in the context at this point is actually the

predecessor of the one we started out talking

about. Since we are also in the S branch of

the induction, this is perfect: if we

instantiate the generic m in the IH with the

m' that we are talking about right now (this

instantiation is performed automatically by

apply), then IHn' gives us exactly what we

need to finish the proof. *)

assert (n' = m') as H.

SSCase "Proof of assertion". apply IHn'.

inversion eq. reflexivity.

rewrite → H. reflexivity. Qed.

What this teaches us is that we need to be careful about using
induction to try to prove something too specific: If we're proving
a property of n and m by induction on n, we may need to
leave m generic.

#### Exercise: 2 stars (beq_nat_eq)

Theorem beq_nat_eq : ∀n m,

true = beq_nat n m → n = m.

Proof.

(* FILL IN HERE *) Admitted.

true = beq_nat n m → n = m.

Proof.

(* FILL IN HERE *) Admitted.

☐

#### Exercise: 2 stars, advanced (beq_nat_eq_informal)

Give a careful informal proof of beq_nat_eq, being as explicit as possible about quantifiers.(* FILL IN HERE *)

☐
The strategy of doing fewer intros before an induction doesn't
always work directly; sometimes a little

*rearrangement*of quantified variables is needed. Suppose, for example, that we wanted to prove double_injective by induction on m instead of n.Theorem double_injective_take2_FAILED : ∀n m,

double n = double m →

n = m.

Proof.

intros n m. induction m as [| m'].

Case "m = O". simpl. intros eq. destruct n as [| n'].

SCase "n = O". reflexivity.

SCase "n = S n'". inversion eq.

Case "m = S m'". intros eq. destruct n as [| n'].

SCase "n = O". inversion eq.

SCase "n = S n'".

assert (n' = m') as H.

SSCase "Proof of assertion".

(* Stuck again here, just like before. *)

Abort.

The problem is that, to do induction on m, we must first
introduce n. (If we simply say induction m without
introducing anything first, Coq will automatically introduce
n for us!)
What can we do about this? One possibility is to rewrite the
statement of the lemma so that m is quantified before n. This
will work, but it's not nice: We don't want to have to mangle the
statements of lemmas to fit the needs of a particular strategy for
proving them — we want to state them in the most clear and
natural way.
What we can do instead is to first introduce all the
quantified variables and then

*re-generalize*one or more of them, taking them out of the context and putting them back at the beginning of the goal. The generalize dependent tactic does this.Theorem double_injective_take2 : ∀n m,

double n = double m →

n = m.

Proof.

intros n m.

(* n and m are both in the context *)

generalize dependent n.

(* Now n is back in the goal and we can do induction on

m and get a sufficiently general IH. *)

induction m as [| m'].

Case "m = O". simpl. intros n eq. destruct n as [| n'].

SCase "n = O". reflexivity.

SCase "n = S n'". inversion eq.

Case "m = S m'". intros n eq. destruct n as [| n'].

SCase "n = O". inversion eq.

SCase "n = S n'".

assert (n' = m') as H.

SSCase "Proof of assertion".

apply IHm'. inversion eq. reflexivity.

rewrite → H. reflexivity. Qed.

Let's look at an informal proof of this theorem. Note that
the proposition we prove by induction leaves n quantified,
corresponding to the use of generalize dependent in our formal
proof.
Prove this by induction on l.

*Theorem*: For any nats n and m, if double n = double m, then n = m.*Proof*: Let m be a nat. We prove by induction on m that, for any n, if double n = double m then n = m.- First, suppose m = 0, and suppose n is a number such
that double n = double m. We must show that n = 0.
- Otherwise, suppose m = S m' and that n is again a number such
that double n = double m. We must show that n = S m', with
the induction hypothesis that for every number s, if double s =
double m' then s = m'.

#### Exercise: 3 stars (gen_dep_practice)

Theorem index_after_last: ∀(n : nat) (X : Type) (l : list X),

length l = n →

index (S n) l = None.

Proof.

(* FILL IN HERE *) Admitted.

☐

☐

#### Exercise: 3 stars, advanced, optional (index_after_last_informal)

Write an informal proof corresponding to your Coq proof of index_after_last:*Theorem*: For all sets X, lists l : list X, and numbers n, if length l = n then index (S n) l = None.*Proof*: (* FILL IN HERE *)☐

#### Exercise: 3 stars, optional (gen_dep_practice_more)

Prove this by induction on l.Theorem length_snoc''' : ∀(n : nat) (X : Type)

(v : X) (l : list X),

length l = n →

length (snoc l v) = S n.

Proof.

(* FILL IN HERE *) Admitted.

☐

#### Exercise: 3 stars, optional (app_length_cons)

Prove this by induction on l1, without using app_length.Theorem app_length_cons : ∀(X : Type) (l1 l2 : list X)

(x : X) (n : nat),

length (l1 ++ (x :: l2)) = n →

S (length (l1 ++ l2)) = n.

Proof.

(* FILL IN HERE *) Admitted.

☐

#### Exercise: 4 stars, optional (app_length_twice)

Prove this by induction on l, without using app_length.Theorem app_length_twice : ∀(X:Type) (n:nat) (l:list X),

length l = n →

length (l ++ l) = n + n.

Proof.

(* FILL IN HERE *) Admitted.

☐

# Using destruct on Compound Expressions

*expression*. We can also do this with destruct.

Definition sillyfun (n : nat) : bool :=

if beq_nat n 3 then false

else if beq_nat n 5 then false

else false.

Theorem sillyfun_false : ∀(n : nat),

sillyfun n = false.

Proof.

intros n. unfold sillyfun.

destruct (beq_nat n 3).

Case "beq_nat n 3 = true". reflexivity.

Case "beq_nat n 3 = false". destruct (beq_nat n 5).

SCase "beq_nat n 5 = true". reflexivity.

SCase "beq_nat n 5 = false". reflexivity. Qed.

After unfolding sillyfun in the above proof, we find that
we are stuck on if (beq_nat n 3) then ... else .... Well,
either n is equal to 3 or it isn't, so we use destruct
(beq_nat n 3) to let us reason about the two cases.

#### Exercise: 1 star (override_shadow)

Theorem override_shadow : ∀{X:Type} x1 x2 k1 k2 (f : nat→X),

(override (override f k1 x2) k1 x1) k2 = (override f k1 x1) k2.

Proof.

(* FILL IN HERE *) Admitted.

(override (override f k1 x2) k1 x1) k2 = (override f k1 x1) k2.

Proof.

(* FILL IN HERE *) Admitted.

Theorem combine_split : ∀X Y (l : list (X * Y)) l1 l2,

split l = (l1, l2) →

combine l1 l2 = l.

Proof.

(* FILL IN HERE *) Admitted.

☐
Complete the definition of split_combine_statement below with a
property that states that split is the inverse of
combine. Then, prove that the property holds. (Be sure to leave
your induction hypothesis general by not doing intros on more
things than necessary. Hint: what property do you need of l1
and l2 for split combine l1 l2 = (l1,l2) to be true?)

#### Exercise: 3 stars, advanced (split_combine)

We have just proven that for all lists of pairs, combine is the inverse of split. How would you formalize the statement that split is the inverse of combine?Definition split_combine_statement : Prop :=

(* FILL IN HERE *) admit.

Theorem split_combine : split_combine_statement.

Proof.

(* FILL IN HERE *) Admitted.

☐

# The remember Tactic

Definition sillyfun1 (n : nat) : bool :=

if beq_nat n 3 then true

else if beq_nat n 5 then true

else false.

And suppose that we want to convince Coq of the rather
obvious observation that sillyfun1 n yields true only when n
is odd. By analogy with the proofs we did with sillyfun above,
it is natural to start the proof like this:

Theorem sillyfun1_odd_FAILED : ∀(n : nat),

sillyfun1 n = true →

oddb n = true.

Proof.

intros n eq. unfold sillyfun1 in eq.

destruct (beq_nat n 3).

(* stuck... *)

Abort.

We get stuck at this point because the context does not
contain enough information to prove the goal! The problem is that
the substitution peformed by destruct is too brutal — it threw
away every occurrence of beq_nat n 3, but we need to keep at
least one of these because we need to be able to reason that
since, in this branch of the case analysis, beq_nat n 3 = true,
it must be that n = 3, from which it follows that n is odd.
What we would really like is not to use destruct directly on
beq_nat n 3 and substitute away all occurrences of this
expression, but rather to use destruct on something else that is
The remember tactic allows us to introduce such a variable.

*equal*to beq_nat n 3. For example, if we had a variable that we knew was equal to beq_nat n 3, we could destruct this variable instead.Theorem sillyfun1_odd : ∀(n : nat),

sillyfun1 n = true →

oddb n = true.

Proof.

intros n eq. unfold sillyfun1 in eq.

remember (beq_nat n 3) as e3.

(* At this point, the context has been enriched with a new

variable e3 and an assumption that e3 = beq_nat n 3.

Now if we do destruct e3... *)

destruct e3.

(* ... the variable e3 gets substituted away (it

disappears completely) and we are left with the same

state as at the point where we got stuck above, except

that the context still contains the extra equality

assumption -- now with true substituted for e3 --

which is exactly what we need to make progress. *)

Case "e3 = true". apply beq_nat_eq in Heqe3.

rewrite → Heqe3. reflexivity.

Case "e3 = false".

(* When we come to the second equality test in the

body of the function we are reasoning about, we can

use remember again in the same way, allowing us

to finish the proof. *)

remember (beq_nat n 5) as e5. destruct e5.

SCase "e5 = true".

apply beq_nat_eq in Heqe5.

rewrite → Heqe5. reflexivity.

SCase "e5 = false". inversion eq. Qed.

Theorem bool_fn_applied_thrice :

∀(f : bool → bool) (b : bool),

f (f (f b)) = f b.

Proof.

(* FILL IN HERE *) Admitted.

∀(f : bool → bool) (b : bool),

f (f (f b)) = f b.

Proof.

(* FILL IN HERE *) Admitted.

Theorem override_same : ∀{X:Type} x1 k1 k2 (f : nat→X),

f k1 = x1 →

(override f k1 x1) k2 = f k2.

Proof.

(* FILL IN HERE *) Admitted.

f k1 = x1 →

(override f k1 x1) k2 = f k2.

Proof.

(* FILL IN HERE *) Admitted.

☐

# The apply ... with ... Tactic

Example trans_eq_example : ∀(a b c d e f : nat),

[a,b] = [c,d] →

[c,d] = [e,f] →

[a,b] = [e,f].

Proof.

intros a b c d e f eq1 eq2.

rewrite → eq1. rewrite → eq2. reflexivity. Qed.

Since this is a common pattern, we might
abstract it out as a lemma recording once and for all
the fact that equality is transitive.

Theorem trans_eq : ∀{X:Type} (n m o : X),

n = m → m = o → n = o.

Proof.

intros X n m o eq1 eq2. rewrite → eq1. rewrite → eq2.

reflexivity. Qed.

Now, we should be able to use trans_eq to
prove the above example. However, to do this we need
a slight refinement of the apply tactic.

Example trans_eq_example' : ∀(a b c d e f : nat),

[a,b] = [c,d] →

[c,d] = [e,f] →

[a,b] = [e,f].

Proof.

intros a b c d e f eq1 eq2.

(* If we simply tell Coq apply trans_eq at this point,

it can tell (by matching the goal against the

conclusion of the lemma) that it should instantiate X

with [nat], n with [a,b], and o with [e,f].

However, the matching process doesn't determine an

instantiation for m: we have to supply one explicitly

by adding with (m:=[c,d]) to the invocation of

apply. *)

apply trans_eq with (m:=[c,d]). apply eq1. apply eq2. Qed.

Actually, we usually don't have to include the name m
in the with clause; Coq is often smart enough to
figure out which instantiation we're giving. We could
instead write: apply trans_eq with c,d.

#### Exercise: 3 stars (apply_with_exercise3)

Theorem override_permute : ∀{X:Type} x1 x2 k1 k2 k3 (f : nat→X),

false = beq_nat k2 k1 →

(override (override f k2 x2) k1 x1) k3 = (override (override f k1 x1) k2 x2) k3.

Proof.

(* FILL IN HERE *) Admitted.

false = beq_nat k2 k1 →

(override (override f k2 x2) k1 x1) k3 = (override (override f k1 x1) k2 x2) k3.

Proof.

(* FILL IN HERE *) Admitted.

Example trans_eq_exercise : ∀(n m o p : nat),

m = (minustwo o) →

(n + p) = m →

(n + p) = (minustwo o).

Proof.

(* FILL IN HERE *) Admitted.

m = (minustwo o) →

(n + p) = m →

(n + p) = (minustwo o).

Proof.

(* FILL IN HERE *) Admitted.

Theorem beq_nat_trans : ∀n m p,

true = beq_nat n m →

true = beq_nat m p →

true = beq_nat n p.

Proof.

(* FILL IN HERE *) Admitted.

true = beq_nat n m →

true = beq_nat m p →

true = beq_nat n p.

Proof.

(* FILL IN HERE *) Admitted.

☐

# Review

*automation*tactics that make Coq do more of the low-level work in many cases. But basically we've got what we need to get work done.

- intros:
move hypotheses/variables from goal to context
- reflexivity:
finish the proof (when the goal looks like e = e)
- apply:
prove goal using a hypothesis, lemma, or constructor
- apply... in H:
apply a hypothesis, lemma, or constructor to a hypothesis in
the context (forward reasoning)
- apply... with...:
explicitly specify values for variables that cannot be
determined by pattern matching
- simpl:
simplify computations in the goal
- simpl in H:
... or a hypothesis
- rewrite:
use an equality hypothesis (or lemma) to rewrite the goal
- rewrite ... in H:
... or a hypothesis
- symmetry:
changes a goal of the form t=u into u=t
- symmetry in H:
changes a hypothesis of the form t=u into u=t
- unfold:
replace a defined constant by its right-hand side in the goal
- unfold... in H:
... or a hypothesis
- destruct... as...:
case analysis on values of inductively defined types
- induction... as...:
induction on values of inductively defined types
- inversion:
reason by injectivity and distinctness of constructors
- remember (e) as x:
give a name (x) to an expression (e) so that we can
destruct x without "losing" e
- assert (e) as H:
introduce a "local lemma" e and call it H
- generalize dependent x: move the variable x (and anything else that depends on it) from the context back to an explicit hypothesis in the goal formula

Theorem beq_nat_sym : ∀(n m : nat),

beq_nat n m = beq_nat m n.

Proof.

(* FILL IN HERE *) Admitted.

beq_nat n m = beq_nat m n.

Proof.

(* FILL IN HERE *) Admitted.

☐
Theorem: For any nats n m, beq_nat n m = beq_nat m n.
Proof:
(* FILL IN HERE *)

☐

#### Exercise: 3 stars, advanced, optional (beq_nat_sym_informal)

Give an informal proof of this lemma that corresponds to your formal proof above:☐

#### Exercise: 3 stars, advanced (filter_exercise)

This one is a bit challenging. Pay attention to the form of your IH.Theorem filter_exercise : ∀(X : Type) (test : X → bool)

(x : X) (l lf : list X),

filter test l = x :: lf →

test x = true.

Proof.

(* FILL IN HERE *) Admitted.

☐
Prove that existsb' and existsb have the same behavior.

#### Exercise: 4 stars, advanced (forall_exists_challenge)

Define two recursive Fixpoints, forallb and existsb. The first checks whether every element in a list satisfies a given predicate:
forallb oddb [1,3,5,7,9] = true

forallb negb [false,false] = true

forallb evenb [0,2,4,5] = false

forallb (beq_nat 5) [] = true

The second checks whether there exists an element in the list that
satisfies a given predicate:
forallb negb [false,false] = true

forallb evenb [0,2,4,5] = false

forallb (beq_nat 5) [] = true

existsb (beq_nat 5) [0,2,3,6] = false

existsb (andb true) [true,true,false] = true

existsb oddb [1,0,0,0,0,3] = true

existsb evenb [] = false

Next, define a existsb (andb true) [true,true,false] = true

existsb oddb [1,0,0,0,0,3] = true

existsb evenb [] = false

*nonrecursive*version of existsb — call it existsb' — using forallb and negb.(* FILL IN HERE *)

☐

(* $Date: 2013-03-22 08:54:37 -0400 (Fri, 22 Mar 2013) $ *)