PJMPIN 3.1.5 68KAPPL????aaaaa.safecopy.tmpa.pAA JMPIN.PROJKAHLv88,yDDOE Preferences%Cannot make lower limit > upper limit-Mixture factor limits must be between 0 and 1)Enter Number of factors between 2 and 31.No Design SelectedCotter Full Factorial Repeated Factorial Fractional Factorial Plackett-Burman Plackett-Burman Folded Full ResolutionMain Effects OnlySome 2-factor interactionsAll 2-factor interactionsSums of Even/Odd TermsSorry, no such design exists.FFModelFractional Factorial Structure FFDesignBlockPatternCenterPtPBDesign CotterDesign Odd EvenFactor #Some levels were not valid numbers.FDesignBBDesignCCDesignComment(Enter Number of factors between 1 and 8.No Design SelectedCentral Composite-UniformCentral Composite-Orthog Box-Behnkenc@@@@@ @@@@@@cFull FullRep.QRep. FF3FullQRep. FF3FF3QFullFF3QFF3FF3QFF3FF3QFF3FF3QFF3 FF3 QFF3 FF3 QFF3 FF3 QFF3 FF3 QFF3 FF3 QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3QFF3 QFF3!QFF3"QFF3#QFF3$QFF3%QFF3&QFF3'QFF3(QFF3FullFullL18j6FullL18jL18jL18jL18j$L36 $L36 $L36 $L36 $L36 FullL18c$FullL18clFullL18cL18cL18c$L36$L36 $L36 $L36 $L36 $L36L18cFullL18cHFullL18cL18cL18cL18c$L36$L36 $L36 $L36 $L36 $L36L18h0FullL18hL18hL18h$L36$L36$L36$L36 $L36 $L36 $L36 $L36L18h`FullL18hL18hL18h$L36$L36$L36$L36 $L36 $L36 $L36 $L36L18hL18hL18hL18h$L36$L36$L36$L36 $L36 $L36 $L36 $L36L18hL18hL18hL18h$L36$L36$L36$L36 $L36 $L36 $L36 $L36L18hL18hL18hL18h$L36$L36$L36$L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36 $L36& CCD-UCCD-OCCD-OBBDCCD-UCCD-O CCD-OBBDBBDCCD-OCCD-U$ CCD-O CCD-U!CCD-O$ CCD-O. BBD. BBD4 CCD-U6 CCD-O: CCD-O5 CCD-U6BBD6 CCD-O: CCD-OZ @CCD-O[@CCD-Ud@CCD-O>BBDZ @CCD-O\@CCD-Ud@CCD-OCCD-U CCD-O#CCD-OCCD-U!CCD-O,CCD-UD4CCD-O Too many axis intervals (> 200). Log scale data must be positive.=Specified range invalid, or shorter than specified increment.Add Reference Line at7Maximum of % items allowed in the reference lines list.z:Color must be 1 to 65Marker must be 1 to 8 column not found in tableNo Table contexttoo many variables not a columntable mismatchMust be Attributexx&Not a saving property for DistributionxxOption does not match analysisxxParameter Name Not FoundEffect Name Not Found!More values than levels in effectContrasts must add to zeroxxx+number of items must be number of responsesNot a valid colorNot a valid marker*Rows only accessed from tables and columns Cells only accessed from columnsTable Not Found"Whose and Range only works on rowsrows could not be allocatedOnly counts rows or columnsInvalid row number!Mismatch of rows/columns and dataData Type Not SupportedOnly numeric columns supportedOnly 5 delimiters allowedxxxxxxx6Must be one of {Average,Centroid,Ward,Single,Complete}Property not knownOnly counts windows, tables Can't make it&Mixing DataTable and Report row/columnNo document contextNo display contextOnly Row Whose supported$Only Menu Items in display supportedExpecting a columnObject has no namecols could not be allocatedno object being examined#Object being examined is wrong type. ClusteringCluster!Hierarchical Clustering, Method =AverageCentroidWardSingleCompleteClustering HistoryNumber of ClustersDistanceLeaderJoiner Dendogram(Cluster is very expensive for many rows.? Memory needs increase as nrow-squared, and time as nrow-cubed.Not enough non-missing dataCluster: calculate distancesCluster: combine clustersStandardize data by Std DevColor while clustering$Shift distances using sampling rates!Use within-cluster std deviationsGoStepHelpN of Clusters...K-Means Clustering ControlSpecify Number of ClustersReducing number of clustersA cluster was droppedStepClusterCountMax Dist Prior DistCluster Summary Cluster MeansCluster Standard DeviationswHierarchical Cluster MethodAverageCentroidWardsSingle LinkageComplete LinkageChisqSphericity Test Whole Model Wilks' LambdaPillai's TraceHotelling-LawleyRoy's Max RootUnivar unadj Epsilon=Univar G-G Epsilon=Univar H-F Epsilon=F TestUnivar unadj Epsilon=Univar G-G Epsilon=Univar H-F Epsilon=Exact F Approx. FValueUnivariate Tests Also0To Construct the M combination across responses,Label:Type:Response SpecificationOrthoDelete Last Column,Click and Edit first column to change scores-Click and Edit values above to form M Matrix. EigenValueCanonical CorrEigvec CentroidVal Canonical2 Canonical1Canonical Centroid Plot9Must have exactly one effect (typed nominal) and <30 vars All BetweenAll Within InteractionsBetween SubjectsWithin Subjects Overall MeansOverall/[ Manova ParamCustom Test...[,TitleSave Discriminant Formulas Save ResidualsSave PredictedslZ CanonicalCanonical Details Centroid PlotSave Canonical YsAdd Contrast...ITestLog-RankWilcoxon Chi-SquareDF Prob>ChiSqCombinedSurvivalFailure SurvStdErrN Failed N CensoredAt Risk Mean[biased]MeanStd Dev Product-Limit Survival Estimates Surviving Survival Plot -log(Surv)Exponential Plotlog(-log(Surv)) Weibull PlotTests Between GroupsSurvival Survival log(Time)Probit(1-Surv)LogNormal PlotExponential Parameter EstimatesWeibull Parameter Estimates!Extreme-value Parameter EstimatesLogNormal Parameter EstimatesAlphaBeta L95 Alpha U95 AlphaL95 BetaU95 BetaLambdaDelta L95 Lambda U95 Lambda L95 Delta U95 DeltaMuSigmaL95 MuU95 Mu L95 Sigma U95 SigmaTheta L95 Theta U95 Theta  :same as Extreme-Value with Alpha=exp(Lambda), Beta=1/DeltaGroup5Select the variable identifying the competing causes.Competing Risks for Prob Time>0Censoring Variable: logLikelihood Omitted CauseCause already doneCompeting Risks EstimationSelect Causes for omissionNoneTime Variable: Exp(Estimate) Beta=1/DeltaAlternate Parameterization Survival Show Points Show Combined Survival PlotExponential Plot Weibull PlotLogNormal PlotCompeting Causes...0 Survival SaveSave Estimates; SurvWeibullEstimate Weibull Parameters> SurvWeibullEstimate Exponential Parameter? SurvLogNormalEstimate LogNormal ParametersZ CompeteOmit Causes...Save EstimatesSave fail-by-cause coord \U,SurvivalProportional HazardsWeibull Log Normal ExponentialN" FitN CheckLikelihood Ratio Tests Confidence Intervals (} DistributionSelect columns for Distribution Quantiles100.0%99.5%97.5%90.0%75.0%50.0%25.0%10.0%2.5%0.5%0.0% maximum   quartilemedianquartile   minimumMomentsMeanStd DevStd Error MeanUpper 95% MeanLower 95% MeanN Sum WeightsSumVarianceSkewnessKurtosisCV Normal Quantile FrequenciesLevelCount ProbabilityCum ProbNumber of LevelsTotal FrequencyTotal LogLikelihoodLevel MidpointRanked RankAvgd Prob N-Quantile Std Test for NormalityShapiro-Wilk W TestKSL TestWDProbDTest Statistic Prob > |t|Prob > tProb < tTotalHypothesized ValueActual EstimateUsing Std Dev of SpecificationValuePercentActualNormal CapabilityIndexLower Spec LimitUpper Spec Limit Spec TargetSigmaCPLCPUCPKCPCPM %Below LSL %Above USL$Specify Hypothesized Value for Mean:Ignoring Weight Column Kernel StdTest Probabilities Estim Prob Hypoth Prob,Click then Enter Hypothesized Probabilities.0Omitted values will use estimated probabilities.=The remaining values will be scaled to sum to 1 minus omittedDoneHelpTestLikelihood RatioPearson Chi-squareDF Prob>Chisqz TestTest Statistic Prob > |z|Prob > zProb < zCapability Analysis Stem and LeafStemLeafCountMultiply Stem.Leaf by 10^&Multiply Stem.Leaf by 10Test Mean=valuet Test Signed-Rank StdErr ProboJUnivariate Options Text Report Histogram Mosaic PlotOutlier Box PlotQuantile Box PlotNormal Quantile Plot-Horizontal Layout Normal Curve Smooth Curve Count Axis Prob Axis Uniform AxesqoK Univar TestsTest Mean=valueTest Dist is NormalSet Spec. Limits Stem and Leaf8oLUnivar Nom TestsTest ProbabilitiesYoMUnivar Report ColsCount Probability StdErr ProbCum Prob/oNUnivar Moments More MomentsUnivariate SaveSave Level Numbers Save Level Midpoints Save RanksSave Ranks averaged Save Prob ScoresSave Normal Quantiles Save Standardized t/Please set the label column for Control Chart's Limits data table. The label column should contain the keywords for the different parameters. dNot a single column in the Limits data table has the same name as the specified process variables. 8Sample size should be a positive integer greater than 1.;Alpha should be a positive probability value less than 1.0.NLower control limit(LCL) can not be greater than the upper control limit(UCL).CNot a single Limits table keyword was found in the specified table.JNeither a valid sample size nor a sample size variable has been specified. LFor P Chart, data should either all be proportions or counts, but not both. 'Standard Deviation can not be negative.(All sample data are either 0 or missing.OThere are not enough valid data to estimate process mean or standard deviation.#Charts for "%" will not be created._There are samples with sample size greater than 25 or less than 2. R Chart will not be created.LThere are samples with sample size less than 2. S Chart will not be created.gThere are samples with sample size greater than 25 or less than 2. R Chart for "%" will not be created.TThere are samples with sample size less than 2. S Chart for "%" will not be created.kCenter line cannot be less than the lower control limit(LCL) nor greater than the upper control limit(UCL).%Unable to compute probability limits.+Problem in evaluating probability function.=Possible precision problem, lower probability limit set to 0.Possible precision problem.Subgroup Sizes:$Note : Limits are based on % sigma. $Note : Limits are based on alpha=%. For n=%@For IR charts, range span should be an integer between 2 and 25.WSelect the data table which has the control limits for the different process variables.Cannot compute control limits for varying subgroup sample sizes since process standard deviation was not provided in the limits data table.BK Sigma should be greater than 1. The most common value used is 3.nFrom Limits Table %0, sample size value = %1, however, the dialog specifies the sample size value to be %2. %Sample size variable must be numeric.lA span for computing the moving average should be specified for the Uniformly Weighted Moving Average chart.qA weight (between 0 and 1) for the average must be specified for the Exponentially Weighted Moving Average chart.QOne of the following must be specified for the cusum mask : H, Alpha, or K Sigma.=For one-sided scheme, H must be specified for the cusum mask.RThere are not enough valid data to estimate standard deviation for the variable %.,Shift to be detected has not been specified.@Data units option used, constant sample size must be specified. H or K must be positive.:Beta should be a positive probability value less than 1.0.kRequired parameters (like shift and target mean) have not been specified for some of the process variables.~All samples for the process variable "%" have at most one observation. Individual/Moving Range charts may be more appropriate.gSample size cannot be greater than 25 for charts using the range to estimate sample standard deviation.RThere are too many process variables. Please try with at most % process variables.There are not enough valid samples to estimate process standard deviation. Some samples may have been eliminated because the samples may be greater than 25.m Note that range cannot be used to estimate process standard deviation. Request for an S chart in such cases.yBVariable Control Charts _SampleSize_KSigma_Alpha_StdDev_Mean_LCL_UCL_AvgR_LCLR_UCLR_AvgS_LCLS_UCLS _RangeSpanLCLUCLAvg0R0S0P0NP0C0U0 Mean of % Range of % Std Dev of %Proportion for % Number for % Count for %Count per Unit for %Moving Range of % _LimitsKey Limits for %P Charts NP ChartsC ChartsU Charts IR Charts_P_U_NP_C_Span_WeightMoving Avg of % EWMA of %'Uniformly Weighted Moving Average Chart+Exponentially Weighted Moving Average ChartCumulative-sum Control ChartCumulative Sum of %_Beta_H_K_Mean_StdDev_Delta_Shift _HeadStart _TwoSided _DataUnits_HData_KData ParametersChartEShwVChaOptions Box ChartNeedle- Show PointsConnect PointsColor1Marker2- Center LineControl Limits Lines Legend-TestsL Show Zones{IRChartIndividual Measurement Moving Range-Hide Options ButtonsConnect thru MissingiVariable ChartsXRS-Hide Options ButtonsConnect thru MissingZ CtrlChart Show ChartHide Options ButtonsConnect thru MissingY!Variable CorrelationsScatterplot Matrix Inverse CorrOutlier Distance [Mahalanobis]Distance Row NumberMahal. DistanceSelect columns to add Prin Comp PSelect columns for Ys by YsMahal. Distance Jackknife Distance [Mahalanobis] Partial Corr.partialled with respect to all other variablesOutliersJackknife DistancePairwise Correlations by Variable CorrelationCount Signif Prob%Nonparametric Measures of Association Spearman Rho Prob>|Rho| Kendall Tau b Prob>|Tau b| Hoeffding DProb>D Correlations4No multivariate correlations due to all rows missing% rows not used due to missing values.a1 MultivariateCorrelations-Multivar.Correlations-InverseCorrelations-PartialCorrelations-PairwiseCorrelations-Nonpar.Scatterplot MatrixOutlier AnalysisPrin Comp/FactorDRSaveSave DistancesSave Jackknife DistancesAa2Scatterplot MatrixDensity EllipsesColor1|a4OutliersOutlier DistancesJackknife DistancesSave Outlier DistanceSave Jackknife DistanceIa5Nonpar Spearman Rho Kendall Tau b Hoeffding DUa3Rotate/Factor AnalysisSave Prin CompSave Rotated Comp JMPIN.HLP JMPIN.PRFuntitled journal JMPt^I.TMPJMP ConfigurationClearAccess Import ^I JMPj^NUM.TMPClaris XTND SystemClarisSave journal as:Save text file as:Problem saving journal.*(Analysis interrupted--not enough memory.JNo data tables are currently open--use the FILE menu to open a data table.!Loss of accuracy in eigenvectors.Eigenvalues/vectors not done.(Select both X and Y variables, or CANCEL%Not enough X or Y variables selected./Analysis interrupted due to an error condition.&Cannot do fit. No data or bad weights.3Select one Y and one or more X variables, or CANCEL'Response must have at least two levels.)Specify ellipsoid confidence probability.WARNING: non-testable contrast.)Couldnt solve critical values--singular.!Sorry, not enough memory to spin.NSorry, we dont support fast motion at the current pixel depth on the display.Cannot do fit--no data.*Warning: test statistic was not estimable.2Frequencies below 0 or over 2,147,483,647 ignored.Error opening scrap.&Cannot save--the data table is locked.&Not enough memory to complete request.No response selected.!Response cannot also be a factor.4Grid size is 0. Grid table not will not be generated"Nested terms cannot be continuous.!The model has a duplicate effect:The model is missing an effect:,Sorry, only one Y variable for Fit Y by Xs.%Limit of five response-surface terms..Some columns were CHARACTER, and werent used.Sum of weights <= 0.Cant spin a CHARACTER column:2Principal component analysis may take a long time.)Decimal must be less than Width or >= 99.7For the table %, x data are all missing or excluded.Width must be between 1 and 32.!Data are all missing or excluded.7For the table %, y data are all missing or excluded.&Tick interval must be between 0 and 1.Analysis cancelled by user.'One or more analyses had to be skipped.OThere is no variation in the data of %0. Stem & Leaf Plot will not be generated; -handler: Deinstall for handlercant find it!smFitLevels: iout>nlevsvdsp: lRemove svdsp: lPrevsvfitload: UNKNOWN CLASS"svPairII: cant find fit to remove$Negative length read from data file.;Bad data read from data file. The table will not be opened.The given file has no data.Unable to open specified file.(Select a Grouping VariableFitting Mean FitMeanStd Dev [RMSE] Std ErrorSSEt-TestMean Difference Std Errort-RatioDF Prob > |t|Prob > tProb < t Paired t-TestMean FitQuantile Density ContoursNonparametric Bivariate DensityDensity Quantile DenCluster Kernel StdSliderApply Linear FitPolynomial FitTransformed Fit to Log Sqrt Square Recip Exp degree=nFit Measured on Original ScaleSum of Squared ErrorRoot Mean Square ErrorR-squareSum of ResidualshAdd Fit Show PointsFit MeanFit LineFit Polynomial7Fit Transformed... Fit Spline9Density Ellipses8Nonpar Density Paired t-Test-Grouping Variable Title Line of FitConfid Curves: Fit Confid Curves: Indiv Color1-Save PredictedsSave ResidualsPlot Residuals Remove FitL7Title 2-quadratic3-cubic 4-quartic5 6@8Title.99.95.90.50Other9Title 1000000-stiff100000100001000100101.1 .01-flexibleOther...mhKernel Control 5% contours Mesh PlotModal ClusteringSave Density Grid2 Spline PopupOutput Coef TableTMeans ComparisonsDif=Mean[i]-Mean[j]Alpha= Each Pair Student's t All Pairs Tukey-Kramer With Best Hsu's MCB With Control Dunnett'stq*d|d|+Comparisons for each pair using Student's t0Comparisons for all pairs using Tukey-Kramer HSD)Comparisons with the best using Hsu's MCB1Comparisons with a control using Dunnett's Method Abs(Dif)-LSD Abs(Dif)-LSDMean[i]-Mean[j]-LSD Abs(Dif)-LSDMean[i]-Mean[j]+LSDEPositive values show pairs of means that are significantly different.QIf a column has any positive values, the mean is significantly less than the max.TIf a column has any negative values, the mean is significantly greater than the min. Std Err MeanMeans for Oneway Anova Quantiles Oneway AnovaMeans and Std DeviationsAssuming equal variancesAnalysis Display2Std Error uses a pooled estimate of error variance 1-way Anovat-Test+Wilcoxon / Kruskal-Wallis Tests (Rank Sums)+Median Test (Number of Points Above Median)'Van der Waerden Test (Normal Quantiles)Count Score Sum Score Mean(Mean-Mean0)/Std0#2-Sample Test, Normal ApproximationSZProb>|Z|$1-way Test, Chi-Square Approximation+Wilcoxon / Kruskal-Wallis Tests (Rank Sums)+Median Test (Number of Points Above Median)'Van der Waerden Test (Normal Quantiles)"Tests that the Variances are Equal O'Brien[.5]Brown-ForsytheLeveneBartlettStd DevMeanAbsDif to MeanMeanAbsDif to Median)Warning: Small sample sizes. Use Caution.9Welch Anova testing Means Equal, allowing Std's Not EqualTestNumberFirst choose a compare command DifferenceEstimate Std Error Lower 95% Upper 95% Matching FitSourceSSDFMSF RatioProb>F Whole ModelError (no Interaction)Error (with Interaction) Interaction IterationsC|FOneWay QuantilesMeans, Anova/t-Test Means, Std Dev, Std Err Compare Each PairCompare All PairsCompare with BestCompare with Control NonparWilcoxon NonparMedian NonparVWUnEqual VariancesSet Alpha Level;Normal Quantile PlotMatching Variable...|GDisplay Show PointsQuantile BoxesMeans DiamondsMeans Dots, Error Bars Std Dev LinesComparison Circles- Connect MeansX-axis proportionalJitterMatching Lines<|HSave Save CenteredSave Standardized!+TestLikelihood RatioPearsonTotalCorrespondence AnalysisDetailsSingular ValueInertiaPortionc1c2c3Fisher's Exact TestLeftRight2-TailProbTotalAll Mosaic PlotTests Total CountModelErrorC Total Total CountCountTotal %Row %Col %Expected Deviation Cell Chi^2KappaStd Err'Kappa measures the degree of agreement.JWarning: 20% of cells have expected count less than 5, Chi-squares suspectCWarning: average cell count less than 1, Pearson Chi-square suspect>Warning: average cell count less than 5, LR Chi-square suspectxTTitle Mosaic Plot CrosstabsTestsCorrespondence Analysis Cochran-Mantel-Haenszel... mT CrosstabsCountTotal %Row %Col %Expected Deviation Cell Chi^2 00 (28lUU ((pUU 8UU ((UU ((RUQ ((vUQ ((ww ((dUQ ((zUU ((UQ <pUU ((iTUU ((bFUU <dUU ((~UQ ((~ ((lUU ((pUQ ((c2bUU <N_UU ((rDD <HxUU ((x ((. ((bUU HJ ((rUU ((UU ((rUU ((rUU ((UU ((UU ((UU ((rUU HJ ((RUU ((RUU ((UUVBUUVBUUdi RlUU <<bUU ((UU ((\UU HP]UU T@^UU HP_E <@`UU ((aUU VXcUU P_dUU <@iUU RpmUU RpnUU RpoUU RpspUU RplqUU ((|4UU ((UU = UU((2eUU ((~ ((eUU <dUU ((UU ((oUU ((eUU <N2cUU <  ( UU VBUU ((rUU XTUU dacrvrtRevertac' Take Derivativeacredu Smaller Fontacenla Larger Fontacnpar New ParametermtflorFloormtceilCeilingmtrnd Roundmtmod Modulomt|x| Absolute Valuemtmax Maximummtmin MinimummtcounCountmt|= Assignmentsmtif If{mtmatcMatchmtchooChoosemtnot Not!mtand And&mtor Or|8chTermschNumericchTranscendentalch Characterch Comparisonsch ConditionschRandomch Probabilitych StatisticalchDatesch Row Stateenparm Parametersenvar VariableschEditingacnvar New Variableacexp Exponentialexpmtln Natural Loglnmtlog Common Loglogmtsin Sinesinmtcos Cosinecosmttan Tangenttanmtasin Inverse SineasinmtacosInverse CosineacosmtatanInverse TangentatanmtsinhHyperbolic SinehsinmtcoshHyperbolic CosinehcosmttanhHyperbolic TangenthtanmtasnhInv. Hyp. SineahsinmtacshInv. Hyp. CosineahcosmtatnhInv. Hyp. Tangentahtanmtgam GammamtigamIncomplete Gammamtlgam Log GammamtsquaSquashmtamina Minutemtanhran Hourmtadaya Daymtaweea Weekmtayeaa YearmttdayTodaymtdateDatemtday Daymtmon MonthmtyearYearmtdow Day of weekmtdoy Day of yearmtwoy Week of yearmtchdsDate to short charactermtchdlDate to long charactermtchdaDate to abbrev. charactermtnumdCharacter to date mtmungMungermt|| Concatenatemtsubs SubstringmtcontContainsmttrimTrimmtwordWordmtitemItemmtlengLengthmtabcdConvert to LowercasemtABCDConvert to Uppercasemtchar Num to Charmtnum Char to Numfmt pimte emti i (row #)@mtn n (# of rows)#ac[] Subscript[mtN # of nonmissingmt% Quantile%mtmeanMean_mtstd Std Deviationmt Summt Productmtj Index]mtof Of mt< x < y x > y>mt x <= ymt x != ymt x >= ymtx x in [a,b]mtx< x in [a,b)mt>=not  and  or <=<=<=<<<=<<inpie?uniform?normal?shufflecolor marker exclude label hide select colorOf markerOf excluded labeled hidden selected findreplacearcsin arccos arctan sinh cosh tanh arcsinh arccosh arctanh otherwiseif match when choose choice ^NUMmaxminnormDist normQuantchi-square Distchi-square Quantt Distt QuantF DistF Quant, ^X DFcentered at ^Xstarting at ^Xfind ^Xreplace with ^Xdateday ^Xmonth ^Xyear ^Xdaymonthyear dayOfWeek ^X as datetodayof dayOfYear weekOfYearcountfrom ^Xto ^X in ^X step%s ^X time%shue ^CHARp^Xh^X as short date^X as long date^X as abbrev. daterow normDensityroundto ^X decimal%s ?exponential?cauchygammaGigammashape ^Xlgamma<<=results t^X ParameterVariablesquashshade min^Xmax^X substringstarting at ^X of length ^X ^X minute%s ^X hour%s^X day%s ^X week%s ^X year%sworditemof ^Xdelimited by ^X lowercase uppercase contains ?binomial^Xprobability ^X?gammaalpha ^X?poisson lambda ^X ?triangularmid ^X ?negBinomial ?geometricprobability ^XseedtShift UpDBYTUse Small FontHBYT # of ItemsOCNT*****LSTCLabel IDDBYTFocus IDDBYTCmd. KeyCHARGroupHBYT*****LSTEVCountOCNT*****LSTCitemOpDWRDclassTNAMrefConDLNGtopicESTR key equivESTR*****LSTEGraphBar/Pie Charts- Overlay Plots. Spinning Plot,Pareto Charts0Control Charts1 Contour Plot3 Ternary Plot4 PreferencesDistribution of Y'sFit: Oneway LayoutFit: Contingency TablesModel: Standard Least Squares Model: Screening Model: Nominal/Ordinal CorrelationsSurvivalSpin: Use GDI OnlyWTablesGroup/Summary...J-SubsetKSort...LStack Columns...MSplit Columns...N TransposeOConcatenate...PJoin...Q- Table Info Attributes-Design Experiment... Spin Display OptionsWhite Background Axis LinesBoxRaysColor Depth CueMarkers vs. Dots Small DotsBackground Coast 'GWindowShow Markers PaletteShow Colors PaletteShow Tools Palette-CascadeTile Arrange Icons-RedrawD Move to BackHide New Data ViewSet Window Name...Close-AnalyzeDistribution of Y6 Fit Y by X7 Fit Model9 Nonlinear Fit<Correlation of Y's:Cluster2Survival=?-LFileNewNOpenOImport-CloseWSaveSSave AsRevert- Preferences Print SetupPrintP- Send Mail-Exit6^ Data Source No FormulaFormula^ " DateFormatShortLongAbbrev Date HH:MM Date HH:MM:SS:days:hrs:mins:days:hrs:mins:secsEU Flip list Vertical listHorizontal listAImport Text File...SAS Transport file...Import Text File...ISAS Transport File...-Run VISION:Data Script...Edit VISION:Data Script...Launch VISION:Datav Toolsarrhandhelp brushrulerscissorslasso magnifiernotepost?.FileNewNOpenOImport-CloseWSaveSSave AsRevert- Preferences Print SetupPrintP-Exit?$**$?$**$?#$2H**2$"H? "$2H$H$2H?# $$$??*5*?  ?=*T5*? T } ? ?? & D% & % &  ? # $ $/$ # ? " d% ' % % d ?|DDD?dD"!|".dD" DD?D" |" D",DD?dD|dDDDD| @c"b" B" B"b""c@  @?@~@@D"L2\:\:L2D"@@@R"""BB@P @P@ ` `  8 `8p' |`'8 ` ` #l0 """"8p~BCBBBBBB B B?B B B B B B B  `* ` 0 FP ` ?1r**$d d @*` """"@@@@@p@AB0D@DDDH"$I$I$I$I$H"$DDD@DB0A@@p@@@@  @?? @`   (`  ` " b @ %` @ @  @` """"  *5V*   *5UV*  @ @ @ `  `  B ` " %!@@hb !!@"dp(0"@` """" ` ? @`L 000,c0   `b  0` #l0H $` @ @"""""""  *! *$ d $ $$  $*`b$0 %! (%  $+$ *`b%$ $`)"% """ ` p  @`   `   `P `@ @ `$9#<"""" <g"# ! a?! A`A y  ` `O A A @`p   """" @  H$$ @@@@@@@@@@@@@@@                        @  @@@  ?    ```    I5%Q%IIqJA%Iڑ? ! ! ! ! !(%!D"!%!( ! ! ?    2 }nSpecify Factors and Limits$'(PPChoose Design Type&2=qGeneral Factorial/((3pSpecify Linear Constraints 6 Preferences'([Choose Design Type CVd+>e&f+>g+>h&iCVjCVk&l~cmuGϐ u~cu[np~#Vq~s~  tL>AzUOK$"(81('8X1%c;(80(8^1BR2B'RX2?cUBR0BR^1\l3\'lX3Yco\l0\l^1v4v'X4scv0v^15'X5c0^16'X6c0^17'X7c0^18'X8c0^19'X9c 0^1#10'"X10c$"0"^1($ Factor Name$ Lower Limit$h Upper Limitp$Type)=Default Limits@UAdd Linear ConstraintsAzU)=3 X1,X2 NamesAU A-Z NamesCDefine Factors and Levels:A1UkCancel 6AddxCancel PHelp46Donex6Delete K ܀_26%02_F6%0 2Z Data Table:2 FPColumn:0 Ȉ List Check8,OK}CancelZHelp,( a < x < b( a <= x < b( a < x <= b( a <= x <= b,(x <= a) OR (x >= b),(x < a) OR (x >= b),(x <= a) OR (x > b),(x < a) OR (x > b)K_,i},Warn if data out of rangenK(_Lower Bound (a)i(}Upper Bound (b)ai2@%02iF@%0 Range Check2i Data Table:2Fi Column (x):K_,i},2UHelp2UF2Define Factors and LevelsDF[2-level DesignkFResponse SurfaceFMixed-level DesignFMixture DesignFGeneral FactorialoED-Optimal Design8.>^.i.../"/Ac+Screening for Factors that may be importantci3Searching for the optimum, while allowing curvature.*3-level and mixed 2- and 3- level factors1When the factors are the ingredients in a mixture#Generate all combinations of levels'7Find D-Optimal designs from candidate points and model. ҈Choose the Type of Design:]2 Preferences OK sCancel ZHelp AUZnsKxdown toup toCK More colorsAU# of Contours:ZnMinimum:sMaximum:Fixed Increment:<HTo specify contours, please give any 3 of the 4 numbers requested below.KColors:C҈Specify Contours^7KOKP*:=You can only use an index with the Sum or Product functions. @8LOKP+/ You must first select a printer.Generate Table< Prev-Next >3CX1az5 A07AGNA^eAu|AAAAAA FactorEzLevels-"Scroll to next or previous factor: }General FactorialA! To generate a table of all combinations of levels of several factors. Enter factor name and up to 10 levels, then use the Next button to go to the next factor.M] Data Type:(Factor Ordering:UHelpOClear,Name:zJ<^xYesJ^ No P;+HThere is not enough memory available to undo this operation. Continue? Remove Formula/ Dont Delete  Keep FormulaPThe formula for ^0 depends on ^1. Do you want to remove ^0s formula; or keep it, but change all references to ^1 into missing?OKPyImThe selected expressions data type is ^0, where a ^1 expression is expected. Please correct the expression.\9wMOKP-;You must select a piece of the formula to manipulate first.oT9MOKP+A4You must choose a column from the column list first.tYmOKPJ.STo add a clause, select the clause that you want to follow and press the comma key.,I]OKP;DhThere will always be at least one clause. You cannot delete it unless you delete the entire expression.`fzOKPXN?To delete a clause, select it first. Then press the delete key.eh|OKPZHYou can only have one non-missing argument in the selected expression. Cut or clear all of the arguments but one and try again.h|OKPXHoThe selected column references a row that has not been evaluated yet. The subscript must be between 1 and i-1.Ti}OKPZ6bThe selected column already has a subscript. To delete a subscript, just choose the column again.DYes!NoPZThe formula for ^0 was created with a later version of JMP and may not be fully understood. Would you like to try and use it anyway?l73KoYes7KNoP);:Are you sure you want to revert to the last formula saved?OKPyAThe formula for ^0 contains unrecognized expressions, probably because it was created with a later version of JMP. These expressions will be replaced with missing boxes.d7K;OKP);CSorry, the Communications Toolbox is not available on this machine.vr.jOKQdjUSorry, there was a problem while trying to initialize the Communications Toolbox. ^0`7K;OKP);?Sorry, there are no Connection Tools available on this machine.X`t;OKPT;8The tool ^0 was not found. Please select another tool.Lr.jOKQdj+There is a problem with the connection. ^0Fr.jOKQdj&The connection couldnt be opened. ^0dr.jOKQdjCThere is a problem sending the start message on the connection. ^0\7K;OKP);